Twin Shaft Tyre Shredding Machine Two Shaft Tire Recycling Shredder

Features of large tire shredders
I. Structural design
1. Double-axis collaborative shearing system
Adopting double-axis drive technology, the two-axis cutters are staggered and interlocked, and the tires are decomposed by rolling shearing to reduce jamming and improve crushing stability.
The moving knife and fixed knife are made of SKD11 material imported from Japan, with a hardness of HRC60° or above, supporting two-sided knife replacement and repeated repairs, and a service life of more than 1,000 tons of processing capacity.
2. Modular knife disc and forced feeding
The modular knife disc design facilitates quick replacement of knives, and is equipped with a hydraulic forced feeding system to ensure continuous and efficient feeding of large tires.
II. Processing capacity
1. Direct processing of large-size tires
It can process steel wire tires (including mouth wire) with a diameter of ≤2000mm, without pre-cutting or removing steel wire, and is suitable for various types such as bias tires and radial tires.
2. The processing capacity reaches 200-10000kg/h, and the double-axis collaboration disperses the single-axis pressure, reduces energy consumption and extends the life of the equipment.
3. Technical advantages
1. Low-speed high-torque operation
The speed is only 5-13 rpm, and with the ultra-large torque design, it achieves low noise (≤75 dB) and low dust emission, which meets environmental protection requirements.
The power transmission is optimized through the cycloidal pinwheel or planetary gear reducer to reduce energy consumption.
2. Intelligent control
The integrated PLC system supports automatic start and stop, overload protection and variable frequency speed regulation (5-60Hz), reducing the need for manual intervention and improving operational safety.
4. Environmental protection and maintenance
1. Green production
Equipped with wind and water cooling system and micro-dust removal device to reduce operational pollution, rubber fragments can be directly used for cracking and refining or recycled building materials production.
2. Convenient maintenance
The knife shaft adopts a detachable design, and the wear-resistant blade can be repaired multiple times, significantly reducing long-term maintenance costs.
5. Application scenarios
It is suitable for large-scale continuous processing scenarios such as waste automobile tires and engineering machinery tires. The crushed rubber blocks can be further processed into fuel or recycled raw materials.

model	size(mm)	Shredder room(mm)	Blads(mm)	motor(k)	weight(kg)
XD-600	2800×1300×1850	600×480	200	11×2	2200
XD-800	3000×1300×1850	800×480	200	15×2	2500
XD-1000	3300×1900×2200	1000×690	300	22×2	5200
XD-1200	3600×2000×2200	1200×690	300	30×2	6400
XD-1500	4180×2100×2400	1500×850	550	55×2	9000
XD-1800	5800×2400×3300	1800×1206	550	75×2	13600
XD-2000	6400×2700×3500	2000×1490	600	90×2	20100
XD-2500	7500×3200×3800	2500×1800	600	110×2	25000
Notes: 1. The number of blade claws, diameter, and thickness can be customized according to the type of material and the size of the discharge. 2. The output of the equipment will be different depending on the type of material and the size of the discharge. 3. More information please contact us, we can custom the product on your request.